4
4 LED INDICATOR & TROUBLESHOOTING
WHEN THE RED INDICATOR IS ON, PLEASE CUT OFF
THE AC POWER SOURCE AND REMOVE THE CHARGER CLAMPS
FROM THE BATTERY POSTS. THEN CHECK THE PROBLEM.
4.1
Yellow LED -
Charging.
Green LED -
Charged/The battery is full and does not need to be charged.
Red LED -
Error.
4.2
Troubleshooting
A. The battery voltage is too low (< l V): Please replace the battery.
B. Not charging:
1. Check to ensure the clamps are connected to the correct battery posts.
(Red clamp to the positive post and Black clamp to the negative post)
2. Check if the cables or plugs are damaged.
3. Check if any of the clamps are loose from the battery posts. Reconnect
the clamps to the battery posts correctly.
5 CHARGING WHEN BATTERY IS OUTSIDE VEHICLE
5.1
The charger input requirement is AC100-240V. Double-check if the AC power input
is correct.
DO NOT MAKE ANY ADJUSTMENTS TO THE AC POWER PLUG
PRIVATELY. IT WILL CAUSE DANGER OR DAMAGE TO THE USERS.
6 DAILY MAINTENENCE
6.1
Read and follow the manual. Please clean the case and all the accessories for the
charger frequently or after every use. Do not expose the charger to the elements on
a rainy day or snowy day.
6.2
Do not disassemble the charger privately. Please get in touch with customer service
at
.
