During use
Checks during diving
1.
Check the pressure gauge repeatedly to monitor air consumption.
Terminate the dive with sufficient air pressure to be able to return safely to
the surface or to the entry point of the dive.
2.
Check for leaks or abnormal behavior of the Divator Pro regulator (small
bubbles will occasionally leave the anti-freeze device and are expected
when ascending, this is normal).
3.
Check that optional equipment fitted to the Divator Pro regulator can be
reached and managed.
4.
If using a DP1 surface supply: check that air is not consumed from the
SCUBA cylinder. See the DP1 surface supply user manual for additional
details.
Warning
If using the DP1, the only indication that the diver has
switched from surface supply to the SCUBA cylinder (bail out)
is a decrease on the diver´s pressure gauge.
Extreme conditions
Diving in extreme conditions, such as diving in cold environments, requires
special training, planning and preparation.
Refer to the separate instruction with document number 34228, available on
the download section of interspiro.com, for more information.
Divator Pro
19
ENGLISH
