9
Environmental
WEEE and RoHS Compliance.
CountDown Touch and its associated accessories
have been manufactured and sold in accordance with the requirements of the ECEE
and RoHS directives. Please return all end-of-life items to your supplier, or your local
Interspace Industries representative directly, for appropriate disposal.
Packaging Materials:
Cardboard box: Grade 150K/T ‘B’ (Single Walled Corrugated- Brown Kraft)
Protective Foam: Grade HLB 22 Grey Foam (High Load Bearing)
Using the Pause and the Reset buttons you can now adjust the time. The pause
button on its own will increment time. Holding the Reset button and the Pause button
will decrement time. Either step on every 5 seconds manually or hold for auto repeat.
Set the time you want your total time to be - say you want 3 minutes then have 3
minutes on the display and hit the Green button, the green button is now bright. Select
a time for the amber, e.g.1 minute and hit the Amber button. The amber button is now
bright. Lastly select a time for red, e.g. 10 seconds and hit the red button. It will flash
red and the display will go out to say it has been stored under that preset. Please test.
For Count Up enter programming mode the same way and ensure the Up/Dn button is
dim and the display is showing 00:00 and the green button is bright. Enter the time you
want the system to go amber and hit the amber button. Then the time you want it to go
to red where it will save that time to that preset.
At any point you can hit a direct button to take control and come out of auto mode.
Dim Setting.
As environments will have different ambient lighting we have provided
a mode to set the dim level. Disconnect the unit from any power and wait 5 seconds.
Press and hold the Reset button and apply power while still holding the Reset button.
The traffic light buttons will then cycle through 4 different settings. Release the Reset
button at the desired brightness. The unit will store this and then reset it itself ready for
action!
