5
If you have any queries regarding these safety instructions or how to maintain the unit
please do not hesitate to contact us on:
+44(0) 1462 600 101
Servicing
. Do not attempt to service this product yourself. Should an unauthorised person
attempt to either open the covers or service our products, it may invalidate your Limited
Factory Warranty. In addition, opening or removing covers and screws may expose you to
electric shocks or other hazards. Refer all servicing to a qualified service personnel.
Setting Up
All connections can be made using standard 3-pin XLR (mic) cables. FiliBuster can be set
up and operated over a combined total distance of no more than 100 meters (300’) from the
remote displays.
Note:
A combination of CombiLamps and numeric displays can be used with the sys-
tem using standard mic cable splitter (3-pin XLR type), such as our own Splixler prod-
uct, thereby allowing for multiple displays, for instance displays located on more than
one lectern. The sum of the total distance between all displays and an output on the
main unit should not exceed 100m (300’), further than this or more than 2 displays on an
output will require a CDSplit, 1 in and 4 out active Splitter.
Figure 1 Connections Diagram
Chairperson
03 15
:
Speaker
