1
User Guide 046
ISL70003ASEHEV2Z Evaluation Board User Guide
The ISL70003ASEHEV2Z evaluation board is designed to
demonstrate the performance of the
ISL70003ASEH
product
as a 12V input to 3.3V output, 6A output current POL regulator,
with a significantly reduced size footprint compared to the
ISL70003ASEHEV1Z platform, making it ideal for wiring into
an existing circuit. For more detailed information, please refer
to the
ISL70003ASEH
datasheet.
The ISL70003ASEHEV2Z evaluation board accepts a nominal
input voltage of 12V and provides a regulated output voltage of
3.3V with output current ranging from 0A to 6A. There is a green
LED indicating PGOOD. The input voltage and output voltage
presets can be changed to alternate voltages by resistor
substitutions.
The ISL70003ASEHEV2Z evaluation board is configured to run
from the nominal 300kHz internal oscillator of the
ISL70003ASEH.
Specifications
This board has been configured and optimized for the following
operating conditions:
• 12V V
IN
, 3.3V V
OUT
, I
OUT
= 6A maximum
• Power density of 9W/sq. inch of active area
• 89% peak efficiency
Key Features
• Simple to use
• Small size PCB, 2.25 sq. inches
• Power-good LED
References
ISL70003ASEH
Datasheet
Ordering Information
PART NUMBER
DESCRIPTION
ISL70003ASEHEV2Z
ISL70003ASEH radiation and SEE
hardened 3V to 12V, 6A synchronous buck
regulator evaluation board
FIGURE 1. ISL70003ASEHEV2Z BLOCK DIAGRAM
ISL70003ASEH
V
OUT
V
IN
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|
Copyright Intersil Americas LLC 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.
August 28, 2015
UG046.0
