Interruptor NIGHT FLIGHT, User Manual, Page: 16 / 19

SMART If you enable this function the LFOs are only
reset if a short time has passed since the last
note was released. This way you can play a
melody line or a chords progression while the
LFOs keep on running. The LFOs will be reset
again as soon as you start playing the next
melody line / chord progression.
FILTER
TYPE Selects the filter type or disables the Filter:
Lowpass 2, Lowpass 4, Bandpass, Highpass 2,
Highpass 4, OFF
SETUP Use this control to define the filter
characteristics:
•
FRQ : By moving the inner knob of the
dual concentric pot you can set the filter
cutoff frequency.
•
RES : Use the outer ring of the dual
concentric pot to set the filter resonance.
KEY FOLLOW If set to a value higher than zero the filter cutoff
frequency will follow the notes played: High
notes will be played with the filter set to a
higher cutoff frequency than low notes
MODULATION The filter cutoff frequency can be either
modulated by the LFO or by the ADSR envelope
•
LFO : By moving the inner knob of the
dual concentric pot you can set the
amount of LFO modulation
•
ADSR : Use the outer ring of the dual
concentric pot to set the amount of
modulation by the Filter envelope.
ATTACK
DECAY
SUSTAIN
RELEASE Use these parameters to define the filter
envelope.
VELOCITY Controls the impact of key velocity on the filter
cutoff frequency.
16 NIGHT FLIGHT VSTi - User Manual