11
5. PBX and System Usage
This telephone can be used behind a PABX or a network system that
utilises the recall function. There are many such systems and whilst it is
likely that no problems will be encountered, it cannot be guaranteed that
the telephone will operate correctly under all circumstances and any cases
of difficulty should be referred to your supplier.
Recall
Before you attempt to change the recall switch ( see
Figure 5
), you should
disconnect the phone from the network.
You will need a screwdriver, or similar tool to remove the cover plate over
the switch. With an insulated tool you can then adjust the switch to the
setting required. This telephone can be set for earth recall or timed-break
recall. If you are unsure of which setting is applicable, please consult your
PABX manager or supplier.
Replace the cover, plug the phone back into the socket and it is ready for
use.
PABX Access
When a PABX access digit is required to obtain a direct outside line, it may
be necessary to insert a pause after dialling the access digit ( see the
Redial / Pause
section of this manual ).
Time Break Recall
Earth Recall
RECALL
Figure 5.
Recall Switch
All manuals and user guides at all-guides.com
