Interpump Hydralok HydraTouch H32, User Manual

Page: 22 / 26

Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 / sales@immhydraulics.co.uk
22
TECHNICAL INFORMATION
Maintenance And Service:
A monthly check on the oil level should be carried out, more frequently for machines in
regular or constant use.
The sliding surfaces of the head must be regularly lubricated with a molybdenum-
disulphide based grease. A thin coat of grease on the aforementioned surfaces (see
page 16) when prompted should be sufficient but for machines operating continuously or
in hot climates it may require more frequent applications.
At yearly intervals it is recommended to re-calibrate the swaging head.
EIL recommend the swaging head to be serviced every 12 to 18 months, depending on
frequency of use. A re-calibration and full service is available from the manufacturer or
authorized distributor.
Spare Parts:
(See Figure 1, Page 22)
H32HydraTouch
Item Part Number Description
9, 10,11,12,13,14 300-078 Seal kit
18,19,20,21 300-079 Spring kit
(optional) 123-070 Gas Struts
H50HydraTouch
Item Part Number Description
9, 10,11,12,13,14 300-072 Seal kit
18,19,20,21 300-064 Spring kit
(optional) 123-069 Gas Struts
H50-46HydraTouch
Item Part Number Description
9, 10,11,12,13,14 300-126 Seal kit
18,19 300-125 Spring kit
Replaces Spring Kit 123-080 Gas Struts
H50-6HydraTouch
Item Part Number Description
9, 10,11,12,13,14 300-108 Seal kit
18,19, 20, 21 300-128 Spring kit
(optional) 123-085 Gas Struts