Machines manufactured by Hydralok, Bristol, UK
Machine enquiries, sales, after sales service :
Interpump Hydraulics (UK) Ltd t/a IMM Hydraulics (UK) : Kidderminster
Tel : (0)121 550 1115 /
17
Lubrication
The swaging head must be lubricated at least every 350 swage cycles. To apply the grease, ensure
that the machine is fully opened and disconnected from the power supply. Lubrication is easily
done with a small clean brush ensuring that the inside of the swaging ring (chromed moving
piston) and flat face of the die holders are evenly coated with grease.
The lubrication counter has been designed as a reminder for the user to lubricate the head.
!
VERY IMPORTANT
Lubrication is the single most important factor that affects the
performance of your Hydralok swaging machine
. It is vital that the
machine is regularly lubricated using a high performance
Molybdenum
Disulphide
based grease.
Lack of lubrication or the use of any other type
of lubricant may cause irreparable damage to the swaging head and it
will void the manufacturer’s warranty.
Lubricate Here
