Interphone f2s Manual Download Page 9

English

English

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

English

DECLARATION OF COMPLIANCE

Hereby, EURO COMMUNICATION EQUIPEMENTS, represented by Xavier MARCHANT, CEO, declares that the 
INTERPHONE F2S MODEL BTMOTOF2S , is in compliance with the essential requirements and other relevant 
provisions of Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and 
telecommunications terminal equipment and the mutual recognition of their conformity.
Nébias, april 26 2012
Xavier MARCHANT

CEO

For the whole declaration please visit :

http://www.supertooth.fr/download

Euro Communication Equipements Sas
Route de Foix D117
11 500 NEBIAS

FRANCE

Federal Communications Commission (FCC) Statement
Industry Canada (IC) Statement

15.21
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the
user’s authority to operate the equipment.
15.105(b)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC/IC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

1)

This device may not cause interference and

2)

This device must accept any interference, including interference that may cause undesired operation of the device.

FCC/IC RF Radiation Exposure Statement:

This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.

9

(Applicable   in   the   European   Union   and   other   European   countries   with   separate   collection 
systems)
This marking shown on the product or its literature, indicates that it should not be disposed with  
other   household   wastes   at   the   end   of   its   working   life.     To   prevent   possible   harm   to   the 
environment or human health from uncontrolled waste disposal, please separate this from other 
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local  
government   office,   for   details   of   where   and   how   they   can   take   this   item   for   environmentally   safe  
recycling.
Business   users   should   contact   their   supplier   and   check   the   terms   and   conditions   of   the   purchase 
contract.  
This product should not be mixed with other commercial wastes for disposal.
This product has an embedded, non-replaceable battery, do not attempt to open the product or remove 
the battery as this may cause injury and damage the product. Please contact the local recycling facility 
for removal of the battery. The embedded, non-replaceable battery is designed to last the life time of the
product

Summary of Contents for f2s










Reviews: