D. POWER ON OR OFF:
Power On:
Press the
MFB (1)
until
Status Indicator (5)
turns blue. Or press for
approximately 3 seconds, a beep will be heard.
Power Off:
Press the
MFB (1)
until
Status Indicator (5)
turns red. Or press for
approximately 5 seconds until 3
rd
tone will be heard.
E. PAIRING TO YOUR BLUETOOTH MOBILE PHONE:
1.
From OFF, press and hold the
MFB (1)
of the
BTMOTOF2S
until the
Status Indicator (5)
turns blinking red/blue.
2. While the headset is in pairing mode, access the Bluetooth menu of your
phone. Turn on the Bluetooth function then execute a Bluetooth search.
(See your phone’s manual).
3.
When the phone displays the list of Bluetooth devices, select
BTMOTOF2S
then enter
0000
and press ok. Pairing is successful if the
alternating red/blue lights of the
Status Indicator (5)
changes to blinking
blue.
Note: Some phones do not connect automatically to the kit after pairing. You
need to press the
MFB (1)
(1
st
beep) to connect.
Or use the menu of your phone:
Go back to
Bluetooth
>
Paired devices
> highlight the name of this
headset (
Interphone F2S
) > press
Options
> then press
Connect
.
The
INTERPHONE F2S
is now ready to use.
F. INSTALLATION:
a) Installing the Clip Mount
IMPORTANT:
There are 2 types of Headset Clips included
in this package. A
Headset Clip with fastening screws
and a
Headset Clip with double-sided-Adhesive Sticker
.
Use what suits best for your helmet.
1. Using the Headset Clip with Fastening Screws
Take the
Headset Clip with
fastening screws
and find the best
location to fix it to the shell of the
helmet.
Tighten
the screws using the provided Screw Driver.
Note: A
Spacer
may be needed to put in between
the 2 parts of the Headset Clip (if the helmet’s shell
is thick).
3
Spacer
