5
Getting Started
ON/OFF - PWR Button.
Press the red "
PWR" button located at the upper right of the
remote keypad (or integral keypad on the Interphase VGA
display) to turn the
SE-200 sonar engine box on. The green
LED light on the left end-panel on the red box should light.
To turn the
SE-200 sonar engine box off, press and hold down
the
PWR button for approximately 3 seconds.
Soft Keys and Screen Menus
The five numbered buttons at the bottom of the remote keypad
(or below the display on the Interphase VGA unit) are called
softkeys (because their use is determined by the menu choices
and the
SE-200’s software). Whenever one of the softkey
buttons are pressed, or when making adjustments (like
changing the color mode, brightness, gain or range) a screen
menu will appear at the bottom of the display. For example,
the sketch at right shows the
ALARM function being selected.
The remote keypad’s softkeys have numbers just above them
that relate to the numbers on the display menus. When using
the Interphase VGA display, the softkey buttons are directly
below the display menu.
For simplification in this manual, menu choices are shown
with a finger pointing to a menu icon (like the alarm icon at
right). This actually means that the softkey button associated
with this icon is being pushed.
Press the EXIT icon to exit or the menu will disappear after
several seconds..
“NAV” Button
This large button (located at center of keypad) is used to make
adjustments to increase or decrease something - like the
GAIN, RANGE, etc. In several menus you can also use the
softkeys relating to the
symbol that appears in the menu
to make the adjustment.
The
symbols on the
NAV button are used to select an
item in the menu. For example, when the
GAIN menu is
displayed, the
symbol on the NAV key will select the
DOWN gain to adjust, while pressing the symbol will select
the
SCAN gain to adjust. See RANGE/GAIN on pages 9-10
for details.
NAV Button
Row of Softkey buttons on bottom of keypad
or below the Interphase VGA display are
related to the symbols or words at the bottom
of the display
.
Depth 13.2 Ft
25
50
25
12.5
Note: Before starting, make sure system software is set to
the proper model (i.e. SE-200A, SE-200B or SE-200C. See
page 18 for details.
EXIT
Summary of Contents for Sonar Engine SE-200
Page 1: ...1 SE 200 SONAR ENGINE...
Page 38: ...38 Notes...