26
User Manual
♦
[C
TR
S
CRN
]:
resets screen offset position to 0,0.
NOTE
In True Motion mode the user cannot change the screen center position.
To set the Center Offset follow the procedure:
[MENU] + "RADAR FEATURES" + [ENTER] + "CENTER OFFSET" + [ENTER]
2.3.9 Status Bar
A
VAILABLE
ONLY
IN
THE
R
ADAR
S
PLIT
PAGES
.
Allows to display the Status Bar on the screen. Note that in Radar Split pages the
Status Bar is displayed always in compact mode to allow for more space for the
graphical data.
To enable (On) or disable (Off) the Status Bar displaying follow the procedure:
[MENU] + "RADAR FEATURES" + [ENTER] + "STATUS BAR" + [ENTER]
2.4
CHART FEATURES
2.4.1 Chart Overlay Mode
A
VAILABLE
ONLY
IN
THE
R
ADAR
F
ULL
PAGE
.
Selects which cartographic objects are to be displayed when Chart Overlay func-
tion is active in Radar Full page.
The following chart presets shall be available:
♦
Full
: Full cartographic representation.
♦
Medium
: includes “Low” settings plus Ports & Services and Auto Chart Boundaries.
♦
Low
: includes also area fills, important city names, Nav-Aids & Lights and
Underwater Object icons.
♦
Minimum
: only the coast lines and elevation objects, no area fill.
♦
As Cartography
: inherits settings from the current cartography setting.
♦
Custom
: Custom chart representation.
To select the desired Chart Overlay Display Mode follow the procedure:
[MENU] + "CHART FEATURES" + [ENTER] + "CHART OVERLAY MODE"
+ [ENTER]
2.4.2 Chart Synchronization
A
VAILABLE
O
NLY
IN
THE
R
ADAR
C
HART
S
PLIT
PAGE
When Chart Synchronization is enabled, the chart display is synchronized to the
Radar display. This function is enabled when Home mode is active (e.g. by press-
ing
[CLEAR]
from the chart screen). An alert window showing the message "Ra-
dar - Chart Synchronization mode On" is displayed.
To enable (On) or disable (Off) the Chart Synchronization follow the procedure:
[MENU] + "CHART FEATURES" + [ENTER] + "CHART SYNCHRONIZATION" +
[ENTER]
2.4.3 Cursor Echo
A
VAILABLE
O
NLY
IN
THE
R
ADAR
C
HART
S
PLIT
PAGE
This function allows to correlate targets on the Radar display with objects in the
chart.
Moving the Radar cursor on Radar display will cause moving another cursor over
the chart. The cursor over the chart shall be positioned over the same lat/lon of
the cursor over the Radar.
When the Cursor Echo function is enabled, the Radar cursor in the chart display is
always shown even if the cursor in the Radar display is hidden.
