background image

85

How to Obtain Service

If you feel your set is not operating properly, first refer to the sections of this manual on 

Troubleshooting

 and

Interference Problems

.  This information solves the most common problems.  If problems persist, please call

Interphase Technical Service

 at 

(831) 477-4944

,

 ext 16

 or send your unit in with the information below filled out.

If you do need to return your set, send it to the following address:

Service Department
Interphase Technologies, Inc.
2880 Research Park Drive, Suite 140
Soquel, CA  95073

In addition, to speed your repair please fill out the following, tear this page out of the manual (or photocopy it), and
tape it to your unit for our technicians to review.  For fastest warranty service, include a copy of your purchase receipt
to verify the purchase date.

RETURN TO:

                                                                                                                                                

                                                                                                                                               

(Your Name)

                                                                                                                                                

                                                                                                                                               

(Street Address - No P.O. Boxes Please)

                                                                                                                                                

                                                                                                                                               

(City)

(State)

(Zip)

Daytime Telephone:

(              

               )                                                                                                               

                                                                                                            

Evening Telephone:

(              

               )                                                                                                               

                                                                                                            

Model:

Twinscope

Serial #:                                                                                                                   

                                                                                                                  

Purchase Date

               

                /              

              /               

               

Type of transducer:

Transom mount                      

                        Thru-Hull             

               

Other                       

                      

Please describe the problems you are having with the unit in as much detail as possible in the space below.  Please
use another sheet of paper if necessary.
                                                                                                                                                                                

                                                                                                                                                                              

                                                                                                                                                                                

                                                                                                                                                                              

                                                                                                                                                                                

                                                                                                                                                                              

                                                                                                                                                                                

                                                                                                                                                                              

                                                                                                                                                                                

                                                                                                                                                                              

                                                                                                                                                                                

                                                                                                                                                                              

Summary of Contents for Color Twinscope

























































































Reviews: