Interpack TWA 1000-M, Operation Manual

Page: 19 / 60

TWA 1000-M (U9701) UDM 9701
19
O
PERATING
I
NSTRUCTIONS
The TWA 1000-M should now be set up with a tape roll, properly threaded and water in the water bottle.
Operating the TWA 1000-M taper is a simple task. A quick pull of the handle will dispense fully
moistened tape ready for application to a corrugated case.
Adjusting The Tape Length
Figure 8-1
1. Loosen the tape length adjustment
knob noted in Figure 8-1
2. Slide the knob to the desired length
3. Retighten the knob
Figure 8-2
Dispensing Tape
1. Pull the handle indicated in Figure
8-3 to the desired tape length or to
the tape length previously set
above.
2.
To cut the tape, simply release the
handle
3.
The handle will return to the home
position and cut the tape as it stops
Figure 8-3
Tape Length
Adjustment Knob
(shown for maximum
tape length)
Tape Length
Adjustment Knob
(shown for medium
tape length)
Tape Dispensing
Pull Handle
(shown in home
position)