International Refrigeration Products WA424ZM, Service Manual

Page: 8 / 25

8
6. Remove two screws of the control
panel from the front panel.
7. Remove the two screws on the top
of the chassis that hold the cabinet to
the unit.
8. Remove the screws from each side
of the case if installed.
9. Hold the cabinet while pulling on the
base of the chassis and remove the
chassis from the cabinet.
10. There may be internal packing
protection. This packing material must
be removed prior to installation
Prepare the Cabinet
1. Place the air conditioner on a hard
flat surface.
2. Locate the foam gasket and top
angle rail.
3. Attach the foam gasket to the top
angle rail.
Screws
FIG.5
。
FIG.6
。
FIG.7
。
FIG.8
。
FIG.9
。
FIG.10