Wireless Light-Level Monitoring
ILT1000
Figure 3. Hawking Control Center. Devices discovered but not connected.
The ILT1000’s show up based on their interface, which utilizes the Texas Instruments XDS100
protocol. While HCC discovers the devices automatically, it does not automatically connect to
them. Note that HCC also displays printer icons as opposed to something more generic for the
ILT1000’s. To connect to an ILT1000, the particular device is selected as shown below. This
enables the “Connect” icon. It also enables the “Network Scanner” button, but this control
serves no purpose for the ILT1000.
Figure 4. Device selected and Connect icon activated.
After selecting the “Connect” icon, HCC shows the device as connected.
7
