14
To connect the base station
1. Turn off the reader and terminal.
2. Connect the cable to the base station.
•
If your cabling requires an external power supply, connect
the power supply to either the base station power port or
the Y jack. Plug the power supply in before any other
cables.
•
If you use the base station in an environment where it can
get wet, such as outside or by an open door, connect the
auxiliary cable to the base station and cover the host port.
•
If you use the base station in a protected environment,
such as inside a warehouse, connect the host cable to the
base station.
3. Connect the other end of the cables to the reader or terminal
and power supply.
For more help installing, configuring, and programming your
base station, refer to the Sabre 1552 Laser Scanner and
MicroBar 9745 Base Station System Manual (Part No. 067670).
You can order the manual from Intermec or download the
manual from the internet at www.intermec.com.
Configuring for Selected Terminals
Before you can configure the base station, you need to associate
the Sabre 1552 laser scanner to the base station. For help, see the
Sabre 1552 Laser Scanner User’s Guide (Part No. 067049). Use
these instructions to configure the MicroBar 9745 base station to
work with selected popular terminals or computers.