Intermec MaxiScan 2200, Reference Manual

Page: 172 / 244

Symbologies
162 MS/2200/RM/00/E/970131
Symbologies
Available symbologies
To optimize the performance of your MaxiScan 2200 and to ensure trouble-free
scanning, do not select symbologies that you do not need.
If possible, do not select more than 2 symbologies at the same time—deactivate the
Code 39 and UPC/EAN default symbologies if you do not need to use them.
Ð
Symbologies—Codabar
Ð
Symbologies—Code 39 (*)
Ð
Symbologies—Code 128 / EAN 128
Ð
Symbologies—Interleaved 2 of 5
Ð
Symbologies—Matrix 2 of 5
Ð
Symbologies—MSI Code
Ð
Symbologies—Plessey Code
Ð
Symbologies—Standard 2 of 5
Ð
Symbologies—UPC/EAN code families (UPC-A, UPC-E, EAN-8, EAN-13) (*)
Default symbologies
Code 39 and the UPC/EAN code families are preselected by default.
When you install and set up your MaxiScan 2200 for the first time, all
the symbology parameters are set to their factory default settings—
indicated by an asterisk (*) in this manual.
The symbology default settings are global factory defaults—they are independent of the
different symbology activation codes.
If you want to reset all the default symbology settings, you can scan the Reset Factory
Defaults bar code (
Ð
Reset all configuration parameters), but you will then have to
completely reconfigure your MaxiScan 2200. It is often easier to scan Disable All
Symbologies and reactivate individual symbologies (
Ð
Symbologies—Activation).