background image

IV7 Vehicle-Mount Reader Instructions

15

Specifications

Patent Information

This product is covered by one or more of the following patents: 
4,739,328; 4,786,907; 4,864,158; 4,888,591; 4,999,636; 
5,030,807; 5,055,659; 5,280,159; 5,504,485; 5,521,601; 
5,550,547; 5,673,037; 5,763,867; 5,777,561; 5,825,045; 
5,828,318; 5,828,693; 5,850,181; 5,850,187; 5,942,987; 
5,995,019; 6,078,251; 6,121,878; 6,122,329; 6,172,596; 
6,195,053; 6,249,227; 6,280,544; 6,286,762; 6,286,763; 
6,288,629; 6,360,208; 6,384,712; 6,404,325; 6,429,775; 
6,486,769; 6,501,807; 6,525,648; 6,639,509; 6,645,327; 
6,677,852; 6,768,414; 6,784,789; 6,816,063; 6,830,181; 
6,838,989; 6,859,190; 6,906,615; 6,919,793; 6,944,424; 
7,075,413; 7,103,087; 7,106,196; 7,117,374; 7,121,467; 
7,123,129; 7,158,046; 7,158,091. 

There may be other U.S. and foreign patents pending.

Dimensions

9.5 cm x 23.6 cm x 34.3 cm 
(3.75 in x 9.3 in x 13.5 in)

Weight

3.08 kg 
(6.8 lb)

DC Electrical Rating

x

 6 to 60 V, 4,5A maximum

Environmental Rating

IP65

Operating Temperature

-25°C to 55°C 
(-13°F to 131°F)

Storage Temperature

-30°C to 75°C 
(-22°F to 167°F)

Humidity

10% to 90%, non-condensing

Summary of Contents for IV7

















Reviews: