10
IV7 Vehicle-Mount Reader Instructions
5
Install the four 5/16"-18 locknuts on the bolts and tighten the
locknuts to secure the IV7 to the load back rest. Torque the
locknuts to 5 Nm (44 lb-in). Do not overtighten the
locknuts.
IV7 Mounting Location:
This illustration shows the installation viewed
from the front with the IV7 mounted in the center channel of the load
back rest. Cables omitted for clarity.
6
Route the power and data cables as needed. If necessary, use
adhesive tiedowns and the removable wire way on the load
back rest to manage the cables. Do not connect the cables yet.
7
Position the antenna in its mounting location on the front of
the load back rest.
8
From the back of the load back rest, slide the antenna
mounting brackets onto the bolts on the antenna case.
9
Install the four 1/4"-20 locknuts on the bolts and tighten the
locknuts to secure the antenna to the load back rest. Torque
the locknuts to 6 Nm (53 lb-in). Do not overtighten the
locknuts.
5/16”-18
locknut
(4 places)
