8
IF4 865-868 MHz Reader Quick Start Guide
Troubleshooting
Troubleshooting
Doesn’t Recognize Tag
1. Ensure antenna is properly connected.
2. Ensure reader is connected to your computer.
3. Ensure computer is plugged into AC outlet and computer is On.
4. Ensure tag is within range of antenna.
5. Call Intermec Technical Support 1-800-755-5505 (option 2).
Product Specifications
Dependent upon operating conditions and demands expected. If
used in a normal office environment with good read conditions,
you could expect to read up to 50 tags per second. Tags located
too far away or in poor locations, with respect to interfering
objects, provides poor results.
Firmware Architecture
Firmware
Spec Detail
Protocol/Compatibility
Communicates in three modes: Ap-
plication Peripheral Interface (API)
and Basic Reader Interface (BRI).
ANSI CCITS 256.2000 for API, part
2, part 3-1
General Specifications
Receiver
Spec Detail
Protocol
ISO 180006B
Tag data rates
32 kbps
Alternate tag read data rate
160 kbps
Transmitter
Spec Detail
Protocol
ISO 180006B
Transmitter type
20% amplitude modulation index
Frequency stability
<
±
20 ppm from -25
°
to +55
°
C
RF Antenna Connections
Spec Detail
Number of antennas
up to 4, electronically switched
Antenna port isolation
≥
22 dB
