background image

4

Loading a Roll of Media

This procedure explains how to load a roll of direct thermal or thermal transfer media.

A

Turn the supply roll retainer counterclockwise
and slide it up to the edge of the roll of media.

B

Turn the supply roll retainer clockwise to lock it
in place.

1

3440G.008

3440G.010

3440G.009

3440G.006

Power

Alert

Feed/Pause

Empty/Pause

3

Save the small label attached to your roll of media or
the label with a 15 digit number stamped on it. You
will need it to set the correct media sensitivity number.
See ”Setting the Media Sensitivity Number“ later in
this guide for help.

5

A

Use your right hand to pull the bottom of the media
cover away from the base of the printer.

B

Use your left hand to lift the front of the media
cover upward.

C

Lift the media cover away from the top of the
printer.

Raise the printhead by rotating the head lift lever
clockwise.

A

Turn the supply roll retainer counterclockwise to
release it.

B

Slide it to the outer end of the supply roll post.
Turn the supply roll retainer clockwise to lock it.

2

Place the roll of media on the supply roll post.

Note:

 If you are using a narrow roll of media (less than 3

inches), insert the media support between the roll of media
and the supply roll retainer before securing it in place.

C

A

B

21

3440G.012

6

3440G.014

120066102605140

120066102605140

4

3400 and 3600 Printer Direct Thermal Media Sensitivity Settings

Sensitivity

Approximate Sensitivity Rating

Setting

Direct Thermal Media

700 

Series High Sensitivity

740

Duratherm Lightning Plus 1

720

Duratherm Lightning Plus 2

400

 Series Medium Sensitivity

460

European IR

450

Duratherm Lightning IR Labels 1

440

European Thermal

420

Duratherm Lightning Labels 1

100 

Series Low Sensitivity

190

Duratherm Buff Tag

180

Duratherm II-1

170

European Tag

160

Duratherm II Tag

140

European Top

130

Duratherm II-2 Labels

120

European Thermal Economy Tag

3400 and 3600 Printer Thermal Transfer Media and Ribbon Sensitivity Settings

Sensitivity

Thermal Transfer Media and Ribbon

Approximate Sensitivity Rating

Setting

(Media/Ribbon Stock)

800

 Series High Sensitivity  (Paper)

864

European Uncoated/Standard 1

854

Duratran TTR Paper Labels/Standard 1

834

Duratran TTR Paper Tags/Standard 1

600

 Series Medium Sensitivity (Plastic)

687

Duratran TTR Polyester 1/Premium 3/6/7

683

Duratran TTR Polyester 1/Premium

677

Duratran Syntran/Premium 3/6/7

673

Duratran Syntran/Premium

637

European Polyester/Premium

633

European Polyethelene/Premium

627

Duratran Kimdura/Premium 3/6/7

623

Duratran Kimdura/Premium

500 

Series Medium Sensitivity  (Paper)

567

Duratran II-1/Premium 3/6/7

563

Duratran II-1/Premium

557

Duratran II Tag-5 mil/Premium 3/6/7

553

Duratran II Tag-5 mil/Premium

537

European Tag/Premium 3/6/7

533

European Tag/Premium

527

Duratran II Tag-7 mil/Premium 3/6/7

523

Duratran II Tag-7 mil/Premium

517

European Coated/Premium 3/6/7

513

European Coated/Premium

300 

Series Low Sensitivity  (Plastic)

369

Super Prem. Poly./Super Prem.-3

366

Super Prem. Poly./Super Prem.-7

Summary of Contents for 3440















Reviews: