EN
8
NB • Installation must be carried out by a qualified electrician and conform to current IEE Regulations.
NB • Mains supply must be suitably fused (usually 3 amps) and provision made for Class A circuit disconnection.
NB • Control is suitable for fixed wiring only.
NB • If the unit is to be surface wired:
- Remove backplate by slackening fixing screw and separate the plate from the timeswitch
- Remove the knock-out from the backplate and the timeswitch
- Screw backplate to wall with counter sunk No. 8. Wood screws, using fixing holes provided.
NB • For socket box mounting:
- Use the centre two holes and fit backplate to box using machine screws
- To ensure clearance for the down flap, ensure that there is a minimum of 4 cm clearance under the unit when
mounted
0662_QE1_QE2.indd 8
29.03.2017 13:44:14
