Programming QE1
Setting current time and day
• Open the keypad cover
• Make sure that the slide switch is on position
“SET TIME AND DAY”
to left.
If the battery is in a fully discharged condition at the moment of installation then the screen
will be blank. The screen will start to display approximately 2 minutes after plugging into
mains supply. Now operate the
“RESET”
button.
•
Press the
“RESET”
button with a dull pointed instrument once
•
Press the
“DAY”
button until the actual day is marked
• Repeatedly press
“HOUR +/-”
, then
“M/-”
buttons until current time is displayed.
• If you are setting the clock in wintertime (GMT): The clock is now correctly correctly set.
If you are setting the clock in summertime (BST): Press the
“SUMMER/WINTER”
button
once. The arrowhead at the bottom of the display moves to indicate Summertime, and the
clock is correctly set.
2
PROGRAMMING YOUR “TOWERCHRON QE1”
SETTING CURRENT TIME AND DAY
➯
Open the keypad cover
➯
Make sure that the slide switch is on position
“SET TIME AND DAY”
to left.
If the battery is in a fully discharged condition at the moment of installation
then the screen will be blank. The screen will start to display approximately
2 minutes after plugging into mains supply. Now operate the “RESET” button.
➯
Press the
“RESET”
button with a dull pointed instrument once
➯
Press the “DAY” button until the actual day is marked
➯
Repeatedly press
“HOUR +/-”
, then “M/-” buttons until
current time is displayed.
NB
• If you are setting the clock in wintertime (GMT): The clock is now
correctly set.
If you are setting the clock in summertime (BST): Press
the
“SUMMER/WINTER”
button once. The arrowhead at the bottom
of the display moves to indicate Summertime, and the clock is
correctly set.
11
0662_QE1_QE2.indd 11
29.03.2017 13:44:15
