Intermatic Grasslin Talento Smart LAN, Operating Instructions Manual

Page: 55 / 560

EN
B
Programming command
OFF
Programm
OK
Neu
OK
Mit Datum?
Ja / Nein
OK
Menü
Menu
Program
New
With Date?
Yes/No
FKT wählen
Aus
OK
Zeit
09:01
Stunde
OK
Zeit
09:50
Minuten
OK
Tage
12345--
Mo-Fr
OK
Select FNC
OFF
Time
09:01
Hour
Time
09:50
Minutes
Days
12345--
Mo-Fr
Kanäle
(1)
1
CH1
OK
Weitere Schaltzeit?
Ja/Nein
OK
Priorität (2)
Hoch
OK
Channels
(1)
1
Add Time?
Yes/No
Priority (2)
High
CH1
1 . Press the
Menu
button:
2 . Select
Program
and confirm with
OK.
For clarification of the following action steps, see flow chart.
3 . Select
New
and confirm with
OK
.
4 . In step
With Date?
,specify whether the device is to be activated on a certain date and - if yes -
confirm with
OK
(also refer to Seite 52) .
5 . Select
OFF
and confirm with
OK
.
6 . Enter hour and minute of the switch-off time (+/-) and confirm each with
OK
.
NOTE: The data for sunrise and sunset should be considered in connection with the astro-variant .
The choice of these parameters is between 11 p .m . and midnight .
7 . Set the weekday(s) (+/-) to which the switching time should apply, and confirm with
OK
.
NOTE: The weekdays 1-5, 6-7 and 1-7 are preset . Individual weekdays can be set (+/-) under
"Select days" .
8 . Select channel
(1)
(+/-) for which the switching time should be set, and confirm with
OK
.
NOTE: The plus sign stands for an active, the minus sign for an inactive channel .
9 . Select
YES
to create an additional switching time, or select
NO
to determine
the possible priority
(2)
.
(1)
The channel selection is only available with 2-channel timers
(2)
The choice of priority is only possible in advanced mode; refer to „Defining prioritisation of programs“
auf Seite 61 .
55