Intermatic Grasslin Talento Smart LAN, Operating Instructions Manual

Page: 52 / 560

EN
CREATING A NEW SWITCHING PROGRAM
Programm
OK
Neu
OK
Mit Datum?
Nein
OK
FKT wählen
...
OK
OK
Menü
Program
Menu
New
With Date?
No
Select FNC
...
Programm
OK
Neu
OK
Mit Datum?
Ja
OK
Datum von
2015.10.01
... Tag
OK
Datum bis
2015.10.02
... Tag
OK
Weiteres Datum?
Nein
OK
FKT wählen
...
OK
Menü
Menu
Program
New
With Date?
Yes
Date from
2015.10.01
... Day
Date from
2015.10.02
... Day
Add Date?
No
Select FNC
...
Programming without date
Programming with date
To create a new switching program, press the key
Menu
:
1 . Select
Program
and confirm with
OK.
2 . Select
New
and confirm with
OK
.
The number of available program memory spaces is displayed briefly (PXXX). The number of available
switching channel memory spaces (Dxxx) then appears.
The available memory spaces depend on the variant of the device .
3 . In step
With Date?
specify with
–
No
and
OK
, the device should be programmed without date range .
The switching command is valid for date independent .
Proceed with action step to step 4 .
– Specify
Yes
and
OK
so that the device will be programmed with a date range .
The switching commands are valid for the dates and/or time periods which are defined in the pro -
gramming, also refer to Seite 53 .
You can define multiple date ranges. If the time periods have been determined, end the query after
the last date range with
No
.
If you have configured the location information (astro function) in the device, then you can choose
whether the device should be switched directly to sunrise and sunset with one change via the day limit .
The astro function is not available in all device variants, also refer to „Location information (Astro)“ auf
Seite 67 .
52