2 – Setting Time
If necessary, press the
1.
MODE
button repeatedly until the words
SET and CLOCK appear in the upper area of the display.
Press the
2.
+
or
–
buttons to enter the current time.
NOTE: To go from AM to PM, keep pressing the +
or
– but-
tons to cycle through the day. You can hold the
+
or
– but-
tons down for 3 seconds to make the time scroll quickly.
Press the
3.
MODE
button to exit and advance to setting Events.
If necessary, press the
1.
MODE
button repeatedly until the words
SET, FIXED, ON/OFF EVENT and EVENT 1 appear on the
display.
If necessary, press the
2.
ENTER
button to display ON @ or OFF @
(depending on what you want to set).
Press the
3.
DAY
button to display 12:00 am and all days of the
week.
Press the
4.
+
or
–
buttons to enter the time you want to set.
NOTE: To go from AM to PM, keep pressing the +
or
– but-
tons to cycle through the day. You can hold the
+
or
– but-
tons down for 3 seconds to make the time scroll quickly.
If you want the Event to occur for a combination of days rather
5.
than every day (e.g., weekends only, weekdays only, or indi-
vidual days), press the
DAY
button again as necessary to cycle
through the individual days or combination of days you want.
NOTE: To choose a combination not shown during cycling
(e.g., Tuesday and Thursday), you must create an individu-
al event for each of the days you want.
ET1725C ONLY
6.
—For a multi-circuit device with loads set
independently, you can choose the load you want the event to
control. The default setting is for both loads, as you can see on
the display. Press the
ON/OFF
button under a load to remove the
load from the event.
When you have set the event correctly, you have two choices:
7.
Press the
-
ENTER
button to set the next fixed time event (up to
28 events).
Press the
-
MODE
button to exit.
3 – Setting Fixed Timed Events
Press the
MODE
button repeatedly to select the desired operating
mode on the display. There are 2 options:
AUTO
•
—where the Time Switch follows the events you have pro-
grammed, turning the circuits ON and OFF at the time(s) set.
NOTE: You can override programmed events and force the
Time Switch ON or OFF by pressing
the
ON/OFF
button.
MANUAL
•
—where any events set are disabled and the Time
Switch controls all circuits through the
ON/OFF
button.
NOTE: You can review or edit any programmed events at any time
by pressing the
MODE
button repeatedly to return to the appropriate
menu, then following programming instruction provided on this sheet.
Operating the Time Switch
Use this procedure to clear the settings programmed for an event.
If necessary, press the
1.
MODE
button repeatedly until the words
SET, FIXED, and ON/OFF EVENTS are shown on the display.
Press the
2.
ENTER
button as necessary to cycle through events
that have been set until you see the event you want to delete.
Press the
3.
+
or
–
buttons AT THE SAME TIME to display --:-- --.
Press the
4.
MODE
button to exit.
OPTIONAL – Deleting (Clearing) an Event
LIMITED ONE-YEAR WARRANTY
If within one (1) year from the date of purchase, this product fails due to a defect in material or workmanship, Intermatic Incorporated will repair or replace it, at its sole op-
tion, free of charge. This warranty is extended to the original household purchaser only and is not transferable. This warranty does not apply to: (a) damage to units caused
by accident, dropping or abuse in handling, acts of God or any negligent use; (b) units which have been subject to unauthorized repair, opened, taken apart or otherwise
modified; (c) units not used in accordance with instructions; (d) damages exceeding the cost of the product; (e) sealed lamps and/or lamp bulbs, LED’s and batteries; (f) the
finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear; (g) transit damage, initial installation costs, removal
costs, or reinstallation costs.
INTERMATIC INCORPORATED WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS
OR IMPLIED WARRANTIES. ALL IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD
STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
This warranty service is available by either (a) returning the product to the dealer from whom the unit was purchased, or (b) mailing the product, along with proof of purchase,
postage prepaid to the authorized service center listed below. This warranty is made by: Intermatic Incorporated/After Sales Service/7777 Winn Rd., Spring Grove, Illinois 60081-
9698/815-675-7000 http://www.intermatic.com Please be sure to wrap the product securely to avoid shipping damage.
INTERMATIC INCORPORATED
SPRING GROVE, ILLINOIS 60081-9698
158--00xxx
Batteries can be easily replaced without removing the Time
•
Switch mechanism or field wiring.
Press in and downward (in the direction of the arrows) on the
•
battery cover.
It is recommended to replace the batteries every 2-3 years with
•
2 AAA industrial grade alkaline cells as part of normal mainte-
nance on the Time Switch.
Be sure to observe battery polarity markings when installing
•
batteries.
No other battery maintenance is required.
•
Battery Maintenance
