48
Note:
DLX900 will attempt to connect using the default installer/9713 account. To
disable DLX900 access change the installer PIN code and set the Download Access
Code to 00000000.
• Installer Service Phone Number – This is announced to the end-user when certain
status conditions occur. For example when there is a low battery, the Status button will
turn red. When the Status button is pressed it will announce the condition, then this
phone number. Add your phone number under Advanced\ \System\Service and Test
Options.
Troubleshooting
Problem
Solution
Cannot get IP address
If you are unable to get an IP address then your wireless/router
may not be configured for automatic DHCP or certain security
settings may be enabled. Check your router settings and try
again.
Cannot see local WiFi access
point from smartphone
Ensure your WiFi access point is able to accept 802.11b or
802.11g. Some 802.11n access points may not accept 802.11g
connections.
Summary of Contents for ZEROWIRE ZW-6404
Page 1: ...P N 466 2520 REV I ISS 02NOV16 ...
Page 10: ......