INSTALLATION AND SETUP
The Ul App Camera Installation Wizard makes adding cameras to your smart home system easy. Prior
to beginning the camera setup identify a location to place or mount your camera that provides you with a desirable
viewing area to see potential intruders or regular home activities, and is located near a power outlet. Ideal
camera locations provide visibility to a primary entrance or a common area used to access other parts of your
home.
Connect the power the supply to the camera and plug it into an outlet, it will take 3 or 4 minutes to fully
boot up.
Add and connect an Indoor Wi-Fi Camera by going to the Ul App browser, log into the Installer site, select
Menu, and then select New Device Setup, select New Camera, then follow the camera installation Wizard step by
step directions. Your new camera installation will be completed in minutes.
As you proceed thru the Camera
Wizard do not change the User Name and Password, since you are being
provided with temporary Installer
privileges. Also if a camera does not connect with your Smart Hub on the first attempt, please re-try connecting
.
Complete the camera settings while logged into the Installer site. Go to the Overview page, from the menu bar
top
left
select Settings, Settings Selector drop down menu select Cameras and Done, and a list of the following
options will be displayed for each camera. We recommend selecting all options, scroll to top, press save, and
then test the system to determine which features fits your needs.
- Send Chime On Button Press
- Send Notification On Button Press
- Trigger Video Clip On Button Press
- Sound Chime On Motion
- Send Notification On Motion
- Trigger Video Clip On Motion
After completing the camera set up exit the Installer site and log into your Site to view real-time video and video
clips
. Go to
the Ul
App
Overview page and select
the Camera icon at the bottom of the page.
Click the
>
button to view your most recent video clip, and then press
the
Arrow icon bottom right to save the Clip to your
phone or forward via text or email. Select the
Red
b
utton to initiate the recording of a ten second video Clip
(select the Settings icon to change the length of clips, default is 10 seconds)
. Press the Settings icon to access
settings for each camera, it is recommended that you turn on the Enable Audio and Enable Motion Detection by
pressing the button, turns green and slides to right, scroll to
the
top
and
press Done to save.
Access Live Video by tapping
the camera view screen
,
press the screen again to Zoom.
Enable two-way Video
Audio by pressing the
microphone
icon in Live Video, press the
icon
again to disable. Press the red button in Live
Video to trigger a Video C
l
ip recording. P
ress the half
-
moon icon to
change the camera between day mode and
N
ight Vision
.
Access previously recor
d
ed Video Clips by logging into your Site, from the Overview page select the Menu bar top
left, select History, and a list of events will be displayed that may include Video Events, which is a Video Clip, and
Video Motion, which indicates the date and time the camera detected motion. Select a Video Event / Clip, then view,
save to your phone, or send via text or email. Select the Filter icon on the top right of the History page to filter events
displayed in the list. Select start date, and events to view including security, video, area, user, and sensor.
Finally, if you want to move the camera for a different view, just unplug, place in a desirable location, plug into a power
outlet, and the camera will automatically re-connect to your Smart Hub.
UltraSync
™
1080p IP Wi-Fi
®
Desktop IR Camera
RS-3230
