![background image](http://html1.mh-extra.com/html/interlogix/tvp-6101/tvp-6101_installation-manual_2077192020.webp)
16
Installation Guide
19200 bps. The baud rate will be set as 2400
bps by default if
it is out of this range. Refer to
Table 4 below:
Table 4: Set the baud rate of the dome
Baud rate
SW2 switch no.
1
2
2400
OFF
OFF
4800
ON
OFF
9600
OFF
ON
19200
ON
ON
IR pendant/wall mount HD-TVI PTZ
Use the t
wo DIP switches SW1 and SW2
to set the PTZ
address, baud rate, protocol, etc. Value ON =1 and OFF =0.
The switch label is on the
back of the SWITCH cover
, as
shown below.
Each number of the switch represents a DIP value, ranging
from 1 to 8 from the lowest to highest.
Summary of Contents for TVP-6101
Page 37: ...Installation Guide 33 3 Locate the two pins near the corner of the dome drive base ...
Page 56: ...52 Installation Guide ...
Page 59: ......
Page 60: ......