58
TruVision Series 3 IP Camera FW3.1 Configuration Manual
2. Select the
IP Address Filter
tab.
3. Check the
Enable IP Address Filter
check box
.
4. Select the type of IP Address Filter in the drop-down list,
Forbidden
or
Allowed
.
5. Click
Add
to add an IP address.
6. Click
Modify
or
Delete
to modify or delete the selected IP address
.
7. Click
Clear
to delete all the IP addrsses.
8. Click
Save
to save the changes.
Defining the security service
The camera provides a security service by allowing you to enable remote login
and to improve data communication security.
To enable the illegal login lock:
1. Click
Configuration
>
Security
>
Security Service
.
2. Check the
Enable Illegal Login Lock
check box
3. Click
Save
to save the changes.
Note:
1. The IP address will be locked if the admin user performs 7 failed user
name/password attempts (10 attempts for the operator/user).
2. If the IP address is locked, you can try to login the device after 5 minutes.
To define SSH:
1. Click
Configuration
>
Security
>
Security Service
.
2. Check the
Enable SSH
check box.
3. Click
Save
to save the changes.
Restore default settings
Use the Default menu to restore default settings to the camera. There are two
options available:
Restore:
Restore all the parameters, except the IP parameters, to the default
settings.
Default:
Restore all the parameters to the default settings.
Note
: If the video standard is changed, it will not be restored to its original setting
when Restore or Default is used.
