Interlogix TVB-5301, Installation Manual, Page: 41 / 68

Installation Guide 35
To mount the IP VF lens bullet camera and the IP
Motorized lens bullet camera with a back box:
1. Use the supplied template to mark out the mounting area.
Drill mounting holes in the surface using the holes
labeled number “2” on the drill template.
2. To route the cable harness through the mounting surface,
cut a cable access hole in the mounting surface,
referencing the letter “A” on the drill template. Skip this
step if you want to route the cables on the surface.
3. Secure the back box to the wall using the mounting
hardware provided.
4. Route the cables of the camera.
5. Hook the camera to the back box using the safety
lanyard.
6. Secure the camera to the back box with the four M4 x 9
screws.