© 2015 United Technologies Corporation. All rights reserved.
P/N 1073093-EN
• REV
A
• ISS 30SEP15
Interlogix is part of UTC Building & Industrial Systems, a unit of United Technologies Corporation.
All rights reserved.
TruVision Wedge Dome Back Box and Dual
View Mount Installation Guide
Product overview
This is the installation guide
for the following TruVision w
edge
camera models:
TVW
-
DVM
(dual v
iew mount
) (u
se with TVD
-PPB)
TVW
-
AWB
-1 (angled b
ack
b
ox for
outdoor application)
TVW
-
AWB
-2 (angled b
ack
b
ox for
indoor application)
TVW
-
2G
-
AD
(A
dapter plate for wedge camera with 2
-gang
box)
Product and package contents
Check the package and contents for visible damage. If any
components are damaged or missing, do not attempt to use
the unit; contact the supplier immediately. If the unit is
returned, it must be shipped back in its original packaging.
TVW-DVM dual view mount
The TVW
-
DVM dual view mount (purchased separately) allows
you to install two panoramic cameras on a single mount. You
then obtain a view of the surrounding area without requiring a
complex integration effort when connecting to your storage
devi
ce or video management system (VMS)
.
Camera mount
:
Tube adapter (30 x 12 mm)
:
Conduit cover/plug:
Template A:
Template B
:
Screw 3 x 10 m (5 pcs m)
:
Screw (10 pcs)
:
Drywall anchor
7.5 x 24.5
mm
M4 screw 4 x 25
mm
Screw 3 x 8 mm (2 pcs):
Screw 4 x 10 mm (5 pcs)
:
Rubber
ring
:
Figure 1: Cameras attached using the dual view mount
TVW-AWB-1 outdoor angled back box
The TVW
-
AWB
-
1 outdoor angled back box (purchased
separately) is weather resistant and includes a G1 threaded
conduit access and plug. It conceals the interconnect cables
and eliminates the blind area below the camera when the
camera is installed on a wall
.
