Interlogix TruVision TVD-2404, Installation Manual

Page: 18 / 28

18 Installation Guide
The TVI signal is blocked until the camera
configuration is complete and the switch is reset to
TVI
.
TVD-2404/TVD-4404 and TVD-2405/TVD-4405
The camera has the CVBS and TVI dual video
outputs. The built-in s witch is for WDR/CVBS
selection. Set the built - in switch to CVBS to view the
setup menu on a standard monitor.
When the programing is finished, you can change
the switch setting to WDR to enable the WDR
feature. In such case, the CVBS output will be
disabled.
If the switch is set to CVBS, the WDR feature is
disabled and the camera has the both CVBS and
TVI output available.