Interlogix TruVision TVD-2404, Installation Manual

Page: 16 / 28

16 Installation Guide
Access the PTZ menu of the connected DVR, set
the TruVision-Coax protocol and use the PTZ
control panel to configure the camera.
Click Iris+ to access to the camera OSD menu and
select an OSD item.
Click the directional buttons UP or DOWN to move
the cursor up or down to an OSD item.
Click the directional buttons LEFT or RIGHT to
move cursor left or right to adjust the value of a
selected OSD item.
Note : The TVD-2405/TVD-4405 camera has a
motorized lens. Use the ZOOM and FOCUS buttons
to adjust its zoom and focus.
For more details, refer to the TVI DVR user manual.
Using a CVBS output
A TVS - C200 (purchase separately) can be used to
program the camera over its CVBS output, not the
TVI video output.
Connect a monitor and the TVS -C200 controller (if
required) as shown below.