Interlogix TruVision TVC-7110-1-N User Manual Download Page 12

 

10 

TruVision TVC-7120-1 Camera User Manual 

Menu Item 

Description 

compensated for high color temperature such as from daylight). Default is 
Indoor. 

Push 

Like ATW, the Push function continually monitors/analyzes the color 
temperature of the incoming light and corrects the WB. However, Push 
has no limits between 1,800 to 10,500

˚

K so it may over-compensate the 

WB for a large single-color object.  

User1 

This is a fixed white balance that is user-defined by blue and red gain 
parameters. Only use this function when there is steady light. 
Blue-gain from 0 to 255 
Red- gain from 0 to 255 

User2 

This is a second fixed white balance that is user-defined by blue and red 
gain parameters. Only use this function when there is steady light. 
Blue-gain from 0 to 255 
Red- gain from 0 to 255 

Anti CR 

The anti-color rolling mode function minimizes the color changes over 
long periods caused by very small differences between the flicker 
frequency of non-inverter fluorescent lights and the drive frequency of the 
image sensor devices.  

Manual 

Manually adjust the white balance by blue gain only. The red gain is 
automatically adjusted when the blue gain is changed. Only use this 
function when there is steady light. 

Level UP

: Press Enter to increase the WB level. 

Level DOWN

: Press Enter to decrease the WB level. 

Push Lock 

Press 

Enter

 to automatically adjust the white balance to the environment 

and lock it at this value. 

 

Set backlight compensation (BLC) 

This feature tells the camera to adjust its total exposure (iris and shutter) to 
ignore the brightest areas of the image, and instead concentrate on darker areas. 

In the Setup Menu, go to 

Backlight 

and select the options to be modified: 

Off

: Option is disabled. Default setting. 

BLC (Backlight Compensation)

: BLC can improve image quality when the 

background illumination is high. It prevents the object in the center from 
appearing too dark. 

HLC (Highlight Compensation)

: HLC masks strong light sources, giving darker 

areas more detail. It is often used to help identify vehicle license plate numbers, 
for example. 

Summary of Contents for TruVision TVC-7110-1-N




















Reviews: