TruVision High Definition TVI Camera Configuration Manual
3
Figure 1: TVS-C200 coax controller
1. Indicator light
2. Arrow keys
3. OK button
The Setup menu provides access to the camera configuration options.
Before using the controller, please check to ensure that the controller has power.
Two AAA batteries are required for the controller to work properly.
1. Connect a video monitor to one of the BNC connectors of the controller.
2. Connect the camera’s 960H CVBS output to the other BNC connector
3. Press the
OK
button for few seconds to display the Setup menu. See Table 1
for instructions on how to move the cursor.
Table 1 Using the OSD control button
Button direction
Description
Up
Moves the cursor upward to select an item
Left
Moves the cursor left to select or adjust the parameters of the selected
item.
Right
Moves the cursor to the right to select or adjust the parameters of the
selected item.
Down
Moves the cursor downward to select an item.
OK
Press the red button for few seconds to display the Setup menu. If the
selected item has its own menu, press the button to enter a submenu.
