Installation Manual
5
•
Servicing
: Do not attempt to service this
camera
yourself. Any attempt to
dismantle or remove the covers from this product will invalidate the warranty
and may also result in serious injury.
Refer all servicing to qualified service
personnel.
•
Cleaning
:
Do not touch
the sensor modules with fingers. If cleaning is
necessary, use a clean cloth with
some ethanol and wipe the camera
gently
.
If the camera will not be used for an extended period of time, put on the lens
cap to protect the sensors from dirt.
Package contents
Check the package and contents for visible damage. If any components are
damaged or missing, do not attempt to use the unit; contact the supplier
immediately. If the unit is returned, it must be shipped back in its original
packaging.
P
ackage contents:
•
Camera or lens
•
Mounting accessories
•
Installation manual
•
CD with
Configuration Manual
and TruVision Device
Manager
Note
:
The ATM/
covert camera has no lens in the product package.
The lens needs to
be purchased separately according to the application needs. Please notice there
are different cable
length and form factors options.
CAUTION:
Use direct plug-
in UL listed power supplies
marked Class
2/CE
certified or LPS (limited power source) of the required output rating as
listed on
the unit.
CAUTION
: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Cable requirements
For proper operation, adhere to the following cable and power requirements for
the
cameras. Category 5 cabling or better is recommended. All network cabling
must be installed according to applicable codes and regulations.
Recommended power cable requirements to connect the camera:
12
VDC power jack
or PoE (
802.3af
)
