Change default camera settings
Default camera settings can be modified using the camera’s
browser configuration interface.
To determine the IP address of the camera to be configured:
Launch the TruVision Device Manager and locate the camera
in the list by device type and/or serial number. The IP address
is listed next to device type.
To access the camera’s browser configuration interface:
Type the IP address into a browser (see “Browser
requirements” on page 13), and then enter the login
credentials.
In TruVision Device Manager, double-click the IPV4 Address
of the camera in the Device finder tab, and then enter the login
credentials.
TruVision Device Manager
In addition to finding device IP addresses, camera IP settings can
be changed in Device Manager without launching the browser
configuration interface.
TruVision Navigator
TruVision cameras are compatible with TruVision Navigator video
management system software, which delivers powerful
centralized and remote video management capabilities.
Note
: Go to www.interlogix.com/video to download TruVision
Device Manager and TruVision Navigator. See the
TruVision
Device Manager User Manual
and the
TruVision Navigator User
Manual
for further information and capabilities.
P/N 1073278-EN • REV A • ISS 09MAY17 © 2017 United Technologies Corporation. All rights reserved.
19
