b. Click the
Test
button to ensure that the IP address is not
already assigned to another device in the network.
11. Click
Save
on the bottom of the screen.
12. Power cycle the camera. See “3. Reboot cameras” on page
16.
Add cameras via WPS
A WPS-enabled wireless router is required to add a camera using
the WPS function.
1. Press the WPS button on the router.
2. Within 120 seconds of pressing the WPS button on the router,
press the WPS button on the camera for approximately two
seconds. See “Camera description – Bullet Camera” on page
6 and “Camera description – Desktop Camera” on page 7 for
WPS button and LED locations.
The link LED on the camera flashes rapidly to indicate that it
has joined the wireless network.
3. Power cycle the camera. See “3. Reboot cameras” on page
16.
18
P/N 1073278-EN • REV A • ISS 09MAY17 © 2017 United Technologies Corporation. All rights reserved.
