TruVision NVR 50 Quick Start Guide
3
Item Name
Description
8. Direction
Enter button
The DIRECTION buttons are used to navigate between different fields and items in menus.
In the Playback mode, the left and right button is used to speed up and slow down recorded video.
In Live View mode, these buttons can be used to cycle through channels.
In PTZ control mode, it can control the movement of the PTZ camera.
The ENTER button is used to confirm selection in any of the menu modes.
In single-frame Playback mode, pressing the button will advance the video by a single frame.
9. PTZ
buttons
Zoom
: Use + and – for digital zoom.
Preset
: Call up preprogrammed preset positions.
Tour
: Call up preprogrammed shadow tours.
10.
Archive button
Press once to enter quick archive mode. Press twice to start archiving. Indicator blinks green when
data is being written to backup device.
Figure 2: TVN 50 back panel
Table 2: Back panel elements
1.
Connect to one CCTV monitors (BNC-type connectors): Main
monitor
2.
Connect one audio input to RCA connectors.
3.
Connect to a RS-232 device.
4.
Connect to a network.
5.
Connect to an optional eSATA device such as SATA HDD,
CD/DVD-RM.
6.
Connect to a power cord.
7.
Connect to speakers for audio output.
8.
Connect to a VGA monitor.
9.
Connect to a HDTV. The HDMI connection supports both digital
audio and video.
10. Connect to an optional USB device such as a mouse, CD/DVD
burner or HDD.
11. Terminate the line to the dome cameras using this RS-485 switch.
Default is Off.
12. Connect to a PTZ control.
13. Connect to a keyboard (KTD-405 shown)
14. Connect up to 16 alarm input cables to relay outputs.
15. Connect up to four alarm relay outputs.
16. Connect to ground.
