TruVision 360° Camera Configuration Manual
13
Configuring network settings
Accessing the camera through a network requires that you define certain network
settings. Use the “Network” folder to define the network settings. See Figure 6 below for
further information.
Figure 6: Network window (TCP/IP window shown)
Parameters
Description
1.
TCP/IP
NIC Type:
Specifies the NIC type. Default is Auto. Other options
include: 10M Half-dup, 10M Full-dup, 100M Half-dup and 100M Full-
dup.
DHCP:
Enable to automatically obtain an IP address and other network
settings from that server.
IPv4 Address:
Specifies the IPv4 address of the camera.
IPv4 Subnet Mask:
Specifies the IPv4 subnet mask.
IPv4 Default Gateway:
Specifies the IPv4 gateway IP address.
IPv6 Mode:
Specifies the IPv6 mode, including Manual (
Static),
Automatic (DHCP) and Neighbor Discovery (Router Advertisement).
IPv6 Address:
Specifies the IPv6 address of the camera.
IPv6 Subnet Prefix Length:
Specifies the IPv6 prefix length.
IPv6 Default Gateway:
Specifies the IPv6 gateway IP address.
MTU:
Specifies the valid value range of MTU. Default is 1500.
Multicast Address:
Specifies a D-class IP address between 224.0.0.0
to 239.255.255.255. Only specify this option if you are using the
multicast function. Some routers prohibit the use of multicast function
in case of a network storm.
DNS server:
Specifies the DNS server for your network.
