![background image](http://html1.mh-extra.com/html/interlogix/truvision-11-31-series/truvision-11-31-series_installation-manual_2076925034.webp)
30
Installation Guide
6. Route the cables through the cable hole.
Note
: If required, you can route cables through the side
screw opening of the camera.
7. Connect the video output connector to the monitor.
Connect the power connector to the power supply.
8. Adjust the image and focus.
1) Three-axis adjustment.
View the camera image using the monitor. Hold the
panning table and pull out slightly to adjust the
panning position of the camera. Rotate the tilting
axes to adjust the tilting position of the camera.
Rotate the lens table to adjust the azimuth angle of
the image.
2) Zoom and focus adjustment.
Loosen the zoom lever and move the lever between
Summary of Contents for TruVision 11/31 Series
