5
Rotary Switch SW4 Setting
DIP Switch SW5 Settings
Note:
See page 11 for switch location
SW4
(rotary)
Function - Sets the ACURT polling
address
Current Setting
0 - F
Address 0-F
Note:
See page 11 for switch location
SW5
ON POSITION = terminated – No Input
Device
1
Off Position = Not Terminated – Zone In
Use
1.
All termination is 1 kohm
Current
Setting
S1
Terminates Zone Input Reader 0 Zone 0
S2
Terminates Zone Input Reader 0 Zone 1
2
2.
If the Exit Push Button is not connected, another 1kohm resistor must be
installed across the zone input
S3
Terminates Zone Input Reader 0 Zone 2
S4
Terminates Zone Input Reader 1 Zone 0
S5
Terminates Zone Input Reader 1 Zone 1
2
S6
Terminates Zone Input Reader 1 Zone 2
