SP1083600 Motor-Driven Blocking Device EasyLock Installation Manual
9
Switching on
The switching on is performed via a 4-pin cable. Two leads are required for the
power supply
— nominal 12 VDC. The drive is performed with a static signal 0 V
— active. Additionally an open connector output is available, which switches
approach to 0 V if the locking bolt is extended.
Figure 2: Blocking device connections
Table 1: Inputs and outputs of the blocking device
Signal
Lead color
Description
+12 V
White
Power 12 V
0 V
Brown
Power supply 0 V
Input
Green
Input “Closed“
- 0 V =
“Closed”
- open or +12 V =
“Opened”
Output
Yellow
Open collector output, active 0
V: Display of the status “closed”