manualshive.com logo in svg

Interlogix NX-595E, Installation Manual, Page: 23 / 47

Share
Download
Interlogix NX-595E Installation Manual Download Page 23

 

NX-595E Installation Manual 

23 

Panel and device configuration  

This is the access point to program all other devices that are on the NetworX 
bus, such as the control panel, radio receivers, output modules etc. 

 

How to:

 Record an Exit message

 

Step Example 

To record a new eit message, from the Voice message 
recording menu  

 

 

 

1. 

 [PIN]

Call the NX-595E via an offsite touch-tone phone to begin 
the session. 

 

 

 

2. 

 

Press [0] for system configuration menu 
Press [0] for panel and device configuration 

 

 

 

3. 

Select a device number followed by # 

 

 

 

 

 

Device ? Is now connected and you are now ready to 
begin programming 

 

 

 

4. 

 

1

st

 star, moves back to panel and device configuration  

2

nd

 star, moves back to system configuration menu 

3

rd

 star, moves back to main menu 

#  Disconnects session 
The above steps presumes you have exited any location 
menus within the device you are connected. 

 

Summary of Contents for NX-595E
















































Reviews:

No comments