EMER
(heat pump only)
If you set your thermostat for HEAT PUMP with auxiliary heat, the EMER
function is available on the Manual screen. If you touch EMER, it displays
EMER|ON. You heat pump is disabled and auxiliary heat is your sole source
of heat. This manual override stays active until you toggle EMER off.
Auxiliary heat is more expensive than the heat pump, so use EMER only if
the heat pump cannot keep up or is defective.
Home icon
Touch to return to the Home screen.
Initial settings
From the Home screen, press the Menu button to display the Menu screen.
On the Menu screen:
•
To set the day of the week
, touch the day area to cycle through the days of
the week and select the current day.
•
To set the current time
, touch the time of day arrows to move the time
selection forward or backward until it displays the correct time. (You can
touch and hold for faster setting.)
•
To select
°
F or
°
C for the display
, touch the
°
F to toggle to
°
C, or touch the
°
C to toggle to
°
F.
•
To set the audible chirp
, touch the musical note icon to toggle between
chirp or no chirp.
•
To return to the Home screen
, touch the Home icon.
Auto-run program
The thermostat comes preprogrammed with an EPA approved program. This
program is recommended by the EPA for energy efficiency. We strongly
recommend that you Auto-Run this program for one week and see if it works for
you. If it does not fit your needs you can always input a custom program.
To run the EPA program:
1. Set the MODE button to HEAT or COOL.
2. Press the Menu button and use the arrows by the time display to set the time.
3. Touch the DAY area and advance it to select the present day.
4. Touch the Home icon.
The unit is now running the program.
P/N 1069511 • REV B • ISS 12FEB13
7
