background image

 10 

 

2. INSTALLATION

 

This section describes the functionalities of the Industrial Power over Coaxial Extender’s components 
and guides you to how to install it on the desktop. Basic knowledge of networking is expected. Please 
read this chapter completely before continuing.   

2.1 Product Description 

Power over Coaxial 

Based on IEEE 802.3at high power over Ethernet and up to 30 watts of power output, IFS PoE over 
coaxial extender solution eliminates the need for additional remote site power while allowing a single PoE 
source, such as a PoE network switch, to provide power to both transceivers and the camera at long 
range. This feature eliminates the need for local and remote site power supplies. 

 

IEEE 802.3at/af PoE Injector and Splitter in one box design 

The MC252-1P-1CX is a Single-Port, 802.3at High Power over Ethernet Injector providing maximum up 
to 30 watts of power output over Ethernet cable which allows data and power to transmit simultaneously 
through the cable to PoE PD (Powered Device). In addition, the MC252-1P-1CX also features PoE 
splitter function with selectable 12V/24V DC power output which makes non-PoE equipment power up as 
well. 

 

Stable Operating Performance under Difficult Environments 

The MC252-1T-1CXP and MC252-1P-1CX extender is the perfect solution for extended distance data 
and power transmission for warehouses, parking lots, campuses, casinos, and many more. They can 
operate stably under temperature range from -40 to 75 degrees C which enables the users to 
conveniently apply the device in almost any location of the network. 

 

Summary of Contents for IFS MC252-1P-1CX






















Reviews: