IFS ES2001-4P-4T User Manual
8
2.2.1 LED indicators
System
LED
Color
Function
PWR
Green
Lights to indicate that the Switch has power.
Per 10/100Mbps port
LED
Color
Function
PoE In-use
Green
Lights to indicate the port is providing 48VDC in-line power. (1-4 ports)
LNK/ACT
Green
Lit: Indicates the link through that port is successfully established.
Blinks to indicate that the Switch is actively sending or receiving data over that port.
2.3 Rear Panel
The rear panel of the ES2001-4P-4T has an AC inlet power socket, which accepts input power from 100 to 240VAC,
50-60Hz.
Figure 2-2
ES2001-4P-4T Switch rear panel
Power Notice:
The device is a power-required device, it means, it will not work till it is powered. If your network is system critical, please
consider using UPS (Uninterrupted Power Supply) for your device to help prevent data loss or network downtime.
In some areas, installing a surge suppression device may also help to protect your ES2001-4P-4T from being damaged by
unregulated surge or current to the ES2001-4P-4T or the power adapter.
2.4 Hardware Installation
2.4.1 Before start up
Before your installation, please refer to the following for your cabling:
100Base-TX
All 100Base-TX ports come with Auto-Negotiation capability. They automatically support 100Base-TX and
10Base-T networks. Users only need to plug a working network device into one of the 100Base-TX ports, and then
turn on the ES2001-4P-4T. The port will automatically detect the appropriate speed (10Mbps, 20Mbps, 100Mbps or
200Mbps) after the negotiation with the connected device.
